Biostat-500 is a 5% concentrated biostatic formulation designed for licensed cleaning, disinfection, & remediation professionals. Biostat-500 is an EPA registered antimicrobial agent effective against a broad spectrum of microorganisms. It contains a water stabilized biostatic chemical which creates a durable antimicrobial barrier on porous & non-porous surfaces. Because Biostat-500 is water stabilized, it can be diluted with tap water at the job site. Biostat-500 inhibits deterioration, damage, & odors caused by bacteria, fungi (mold & mildew), & algae. The product can be used on building materials including: wood, flake board, sheathing, wall board, insulation, ceiling tiles, brick, stone, siding, EIFS, shingles, roofing, concrete, concrete products, grout, carpets, fabrics, & upholstery. Biostat-500 is non-leaching, non-toxic, & environmentally safe.

Biostat-Pro™ is the only EPA registered biostatic disinfectant on the market & sold exclusively through Advanced Remediation. It is a professional grade formulation designed specifically for the mold remediation & structural restoration industry. It is a residual antimicrobial agent that inhibits the growth of bacteria, mold, & algae on porous and non-porous surfaces. As a residual biostatic inhibitor, is used on residential & commercial construction sites to protect wood & other building surfaces from damage & deterioration caused by microbial growth. Biostat-Pro is also widely used in the mold remediation industry to provide residual protection on cleaned surfaces to inhibit mold re-growth.

Biostat-Pro is a low solvent based, high concentrated formula designed to be diluted with tap water. Once applied, it forms a durable bond with surfaces & will not leach, volatilize, outgass, or rub off. It contains no heavy metals, phenolics, or environmentally damaging poisons. Because there are no known exposure hazards or warnings, Biostat-Pro is safe to use on all approved non-food contact surfaces. Surfaces include - wooden building materials, engineered lumber, plywood, oriented strand board, sheathing, decking, wall board, vinyl siding, plastic siding, wood siding, concrete and concrete products, cinder blocks, brick, stone, ceiling tiles, & shingles.

Oxidizing Surface Cleaner-500™ is an advanced stabilized surface oxidizer designed specifically for the mold remediation industry. OSC-500 is a topically applied product that replaces traditional labor intensive dry sanding remediation techniques. This product is designed to remove both active & inactive biogrowth on contact while lifting stains from surfaces. Unlike chlorine bleach, this unique formulation is designed to penetrate deeply into porous surfaces where fungal contamination resides. Its cleaning action both destroys mold hypha & denature fungi proteins. The applications for OSC-500 include residential & commercial building restoration, storm/water damaged structures, bathrooms, marine applications, & a wide range of industrial cleaning applications. The product has been proven safe & effective on wood, fiberglass, roofing, porcelain, concrete, brick, siding, & outdoor surfaces.

OSC-500 is applied via high pressure sprayer for mold remediation projects or low pressure for spot remediation projects. Once applied, the foaming action indicates the presence of microorganisms. OSC-500 will quickly penetrate deeply into porous surfaces like wood, concrete, grout & tile. Light brushing will speed cleaning & ensure the product reaches all areas. For long term, proven protection against potential new mold growth, apply Biostat-500 or Biostat-Pro to surfaces.

PowerClean-Max™ is an EPA registered cleaner/disinfectant designed specifically for treating flood damaged structures. PC-Max is a one-step application which sanitizes surfaces that have been in contact with water, mud, sewage, or other organic contamination. Its broad spectrum action ensures maximum disinfection & odor elimination, while its powerful surfactants dissolve oil, stains, & embedded solids from surfaces.

PowerClean-Max is a highly concentrated formula containing a blend of Quaternary bactericidal disinfectants in addition to a surfactant cleaning package. This unique combination not only provides superior surface cleaning action but also ensures surfaces are properly disinfected. PC-Max is EPA registered as a germicide, fungicide, mildewstat, virucide, & surface sanitizer. PC-Max quickly disinfects surfaces so that odors, stains, & microbial growth can be controlled. One treatment is generally all that is necessary to ensure structures are properly sanitized prior to rebuilding. PC-Max leaves a fresh lemon fragrance after use.

ARS Surface Sanitizer is an EPA-registered, non-acidic disinfectant which kills most bacteria, viruses, molds, & mildews on contact. Surface Sanitizer is safe to use all types of hard surfaces in the bathroom, kitchen (non-food contact surfaces), & living areas including walls, sinks, showers, urinals, counter tops, floors, tables, etc. Surface Sanitizer has been proven effective against Enterococcus faecalis, Escherichia coli, Klebsiella pneumoniae, Listeria monocytogenes, Pseudomonas aeruginosa, Salmonella choleraesuis, Salmonella typhi, Staphylococcus auereus, Streptococcus pyogenes, Influenza A/Brazil, Herpes Simplex I & II, Trichophyton mentagrophytes. Surface Sanitizer is compatible with the ARS Biostatic Disinfection System. Will not stain or discolor hard surfaces & will not react with metal surfaces.

MultiClean-Pro™ is a highly concentrated blend of surfactants & emulsifiers designed for commercial & industrial applications. MultiClean-Pro is an effective substitute for environmentally damaging solvents. The product is water-based & quickly emulsifies even the most stubborn oil & grease. The product has been specially formulated to be environmentally safe & biodegradable. MultiClean-Pro contains no solvents, acids, butyl cellosolve, is not caustic, & contains no SARA Title III ingredients.

MultiClean-Pro aggressively emulsifies engine oils, caked on grease, lifts oil stains from carpets, textiles, concrete, tools, dies, & machinery. This all-purpose cleaner is safe on all hard surfaces not damaged by water including metal surfaces, natural surfaces, manmade surfaces, kitchen & bathroom surfaces. Because the product is biodegradable, it can safely be used in the marine environment to clean out bilges, engine compartments, exterior surfaces, toilets, & for general wash down applications.

CD-12™ Cleaner/Degreaser is a revolutionary new surfactant designed specifically for removing grease & oil stains from concrete, floors, & parking lots. Deeply penetrates surfaces to emulsify embedded stains. Effective for oil, grease, transmission fluid, petroleum solvents, & engine & break cleaners. Contains no petroleum, terpene solvents, caustics, acids, or phosphates. CD-12 is water-based, non-flammable & non-abrasive. Simply spray on product & let soak for 1 hour or more. Hose or pressure wash surfaces to remove residue.

For cleaning applications around the home, office, industrial/manufacturing plant, garage, etc. For stains on concrete, driveways, asphalt, & garage floors spray product directly onto surface. Do not dilute & do not wet surface with water prior to application. Allow CD-12 to soak into surface for a minimum of 1 hour. Hose off with water or pressure washer. Generally there is no need to scrub surface.

Facility Cleaner-35™ is a new generation water-based cleaner. It is a mildly alkaline (pH 9.25) product which contains no solvents, VOCs, concentrated caustics, or acids yet provides superior cleaning properties over two step acid-alkaline cleaners.

The product is shipped in a highly concentrated formula so that it can be diluted for numerous applications. Dilution ratios up to 50:1 achieve very effective cleaning results. The product has been proven as an effective cleaner on concrete floors, driveways, truck & mass-transit wash, tanker truck cleaner, tools, industrial cleaning applications, general facilities cleaner. FC-35 is safe to use in the marine environment for cleaning bilges, engine rooms, & decks. The product will quickly remove oils, lubricants, gasoline, fuel oils, & silicone.

BioZyme-Pro™ is a professional grade enzymatic & bioactive culture designed to specifically attack oil, grease, odor causing microorganisms, & odor causing organic compounds. BioZyme-Pro contains the highest level of beneficial bacteria & enzymes in the industry. We have also included a surfactant to provide additional cleaning power. BioZyme-Pro is an effective grease emulsifier for drain lines. It quickly consumes grease buildup in drains, sewer pipes, grease traps, & septic tanks to keep drains open. Simply add the proper dosage through sinks & drains to prevent grease buildup. For septic tanks, flush the proper dosage down toilets once a week to maintain maximum efficiency. BioZyme-Pro will not upset beneficial bacteria found in septic systems.

For odor control, BioZyme-Pro quickly digests odor causing compounds. It is not an odor mask or odor absorbent. Its bioactive cultures & enzymatic action destroy odor causing microorganisms & their byproducts including ammonia. It is very effective for eliminating pet urine odors & other odor causing microorganisms on carpets, floors, walls, bedding & upholstery. BioZyme-Pro is also effective in eliminating many industrial odors generated during manufacturing including the food & beverage industry. Simply wet the effective area & let dry. Within minutes, odors are permanently consumed.

SmokePro-912™ is a highly concentrated smoke odor eliminator designed for professional remediators. SP-912 is effective for eliminating smoke odors on wood, floors, ceilings, drywall, carpets & fabrics. The product uses a high concentration of specially formulated enzymes & surfactants which breakdown & consume odor producing compounds created during structure fires. SP-912 is not an odor mask or air freshener, but an odor eliminator. Dilute a few ounces of concentrate into one gallon of water, & spray the effected area. SP-912 is safe for use in thermal fogging units for large area coverage.

SmokePro-912 is also a very effective laundry additive to deodorize smoke damaged clothes & washable fabrics. Add 2 to 4 ounces of product into residential washing machine & wash normally. Product is safe for extended soaking for heavily damaged fabrics.